CP-CMMS concrete maturity meter system

Know the strength of every pour, in place.

Sensors cast into the element, a rugged meter at the pour, and live strength on your phone and laptop from fresh to hardened state.

Download product brochure (PDF, 3.2 MB)
  • Rugged enclosureMade and tested for site conditions and site users.
  • Made in IndiaIn-house electronics, manufactured in Pune with GIZMO.
  • Locking connectorsReusable sensors plug in and out between pours.
  • Wireless to the cloudReadings sync over site Wi-Fi, or LoRa on V3.0.

One system, three parts.

CP-CMMS maturity meter

Maturity meter

Logs temperature from every sensor from the moment of placement.

Reusable digital sensor

Digital sensors

Reusable 200+ times, with sacrificial sensors where retrieval isn't possible. Robust, waterproof, digital output.

CP-CMMS mobile app showing temperature and TTF curves

App, web app and site software

Live strength, temperature and TTF curves per sensor, project set-up, sensor comparison and printable reports.

From V1.0 to V3.0.

  1. CP-CMMS V1.0 maturity meter with four sensor cables
    2021 V1.0

    First CP-CMMS maturity meter deployed on site.

  2. CP-CMMS V2.3 maturity meter in a black enclosure
    2022 V2.3 Standard

    Rugged black enclosure, four reusable digital sensors, site Wi-Fi.

  3. Precast CP-CMMS VC-1.0 with charger, ambient sensor, precast bed sensor and an extra sacrificial sensor
    2024 VC-1.0 and VM1.0

    VC-1.0 for precast plants: a permanent sensor in the casting bed and automatic start and stop on every pour. VM1.0 for match-curing and mix design.

  4. CP-CMMS V3.0 meter, white unit, front view
    2025 V3.0 Latest

    Compact and more reliable. LoRa wireless, long battery life, DIY installation, easier to use.

CP-CMMS V3.0 meter with locking sensor connectors
CP-CMMS V3.0 label: concrete maturity meter, made in India, manufactured with GIZMO

From calibration to decision.

  1. Step 1

    Calibrate the mix

    Cubes tested at different ages build your mix's strength-maturity curve, using a fixed sensor in two cubes per mix. Usually one to two days.

  2. Step 2

    Deploy on the pour

    Sensors go into the element at critical points, and the meter logs from the moment concrete is placed.

  3. Step 3

    Watch strength live

    Temperature-time factor converts to in-place strength through the calibration curve, per ASTM C1074.

  4. Step 4

    Decide on data

    Strip, stress, lift or load when the target is reached, with a report to prove it.

Engineer setting up the CP-CMMS kit on site, with meter, tagged sensors and tablet in the carry case
Site team placing CP-CMMS sensors in concrete and reading strength on a tablet
Precast CP-CMMS VC-1.0 with charger, ambient sensor, precast bed sensor and an extra sacrificial sensor
For precast plants · since 2024

Precast VC-1.0, built into the bed.

A customised system for precast factories. The sensor is embedded permanently in the casting bed, so routine pours need no cast-in sensor and every pour on that bed is recorded.

  • Permanent bed sensorCustomised to the mould and flush with the base plate. Reused on every cycle.
  • Automatic start and stopAn ambient sensor detects each pour and starts and stops the reading on its own.
  • Continuous data, auto resetStrength data streams through the cycle and the meter resets itself for the next pour.
  • Extra sacrificial sensorOptional, for elements that need a reading from inside the concrete.
C-Probe and L&T engineers at the L&T precast factory in MumbaiReviewing a precast casting bed for VC-1.0 sensor placement
VC-1.0 deployment assessment at an L&T precast factory, Mumbai.

Compare models

Standard CP-CMMS meter in a black enclosure

Standard

Best for
Building and infrastructure sites
Sensors per meter
4
Sensor format
Reusable and sacrificial, 3 m cable
Cable reach
3 m and 10 m extensions
Connectivity
Site Wi-Fi
Power
Rechargeable, optional weatherproof supply
Coverage
About 4,000 sq ft of floor per meter
Precast CP-CMMS VC-1.0 with charger, ambient sensor, precast bed sensor and an extra sacrificial sensor

Precast VC-1.0

Best for
Precast plants, every shift
Sensors per meter
Up to 9 active, including ambient
Sensor format
Permanent sensors in the casting bed, flush with the mould base plate
Cable reach
Up to 20 m cumulative
Connectivity
Site Wi-Fi
Power
Continuous charging, auto reset
Coverage
Two sensor points per element
CP-CMMS V3.0 meter, white unit

V3.0

Best for
Large sites and DIY installs
Sensors per meter
On request
Sensor format
Reusable and sacrificial
Cable reach
3 m and 10 m extensions
Connectivity
LoRa
Power
Long-life battery
Coverage
On request
SpecificationStandardPrecast VC-1.0V3.0
Photo
Standard CP-CMMS meter in a black enclosure
Precast CP-CMMS VC-1.0 with charger, ambient sensor, precast bed sensor and an extra sacrificial sensor
CP-CMMS V3.0 meter, white unit
Best forBuilding and infrastructure sitesPrecast plants, every shiftLarge sites and DIY installs
Sensors per meter4Up to 9 active, including ambientOn request
Sensor formatReusable and sacrificial, 3 m cablePermanent sensors in the casting bed, flush with the mould base plateReusable and sacrificial
Cable reach3 m and 10 m extensionsUp to 20 m cumulative3 m and 10 m extensions
ConnectivitySite Wi-FiSite Wi-FiLoRa
PowerRechargeable, optional weatherproof supplyContinuous charging, auto resetLong-life battery
CoverageAbout 4,000 sq ft of floor per meterTwo sensor points per elementOn request

All models: maturity method per ASTM C1074, sensors reusable 200+ times, readings on app, web app and site software, training and technical support included.

Built on recognised standards.

ASTM C1074

Standard practice for estimating concrete strength by the maturity method. The basis for every strength value CP-CMMS reports.

AASHTO T 325

Estimating concrete strength in transportation construction by maturity tests.

ACI 228.1R

ACI report on in-place methods to estimate concrete strength, including the maturity method.

ACI 305R / 306R

Guides to hot- and cold-weather concreting, where temperature records matter most.

IS 456

India's code of practice for plain and reinforced concrete.

IRC 112

Indian Roads Congress code of practice for concrete road bridges.

For concrete labs · QA/QC and R&D

Make your concrete lab smart.

The same sensors and software turn a cement and concrete lab into a continuous data source. Hydration, mix behaviour and strength are recorded automatically and non-destructively.

Early hydration fingerprintIllustrative
Setting Peak heat Time after mixing (hours) Temperature (°C)
  • Mix A
  • Mix B with SCM

What the lab measures

  • Initial and final setting time
  • Heat of hydration and temperature profile
  • Hydration kinetics
  • Early-age strength gain

Thermal measurement of early hydration per ASTM C1753.

Characterise cement

  • Setting time and heat of hydration
  • Hydration kinetics over time
  • Compare cements and SCMs

Characterise the mix

  • Optimise mixes for early strength
  • Compare curing conditions
  • Evaluate admixture and cement combinations

Monitor strength live

  • Track early-age strength continuously
  • Cast and crush fewer cubes
  • Data for demould, loading and dispatch

Data-driven QC

  • Spot deviations early and correct them
  • Check batch-to-batch consistency
  • Keep complete digital records
Ideal for
  • QA/QC and R&D labs
  • Mix designers and consultants
  • Researchers and faculty
  • Infrastructure and industrial projects

Lab standards: ASTM C1753 early hydration by thermal measurement · ASTM C918 early-age strength and later-age projection · ASTM C1064 temperature of fresh concrete · ASTM C1074 maturity method.

Download the smart lab sheet (PDF, 305 KB)

Frequently asked questions.

What is a concrete maturity meter?

A concrete maturity meter records the temperature history of concrete from the moment it is placed. Using the maturity method in ASTM C1074, that history becomes a temperature–time factor, and a calibration curve for your mix turns it into in-place compressive strength, live.

Does CP-CMMS replace cube tests?

It cuts them by at least 50%. Cubes are still used to calibrate each mix and wherever your contract requires them for acceptance. Day-to-day decisions such as de-shuttering, stressing and lifting run on measured in-place strength instead of waiting for cube results.

How long does calibration take?

Usually one to two days. Cubes of your mix are tested at different ages, with a fixed sensor in two cubes per mix, to build the strength–maturity curve used on site.

Are the sensors reusable?

Yes. CP-CMMS sensors are reusable 200+ times. Sacrificial sensors are available where retrieval isn't possible.

How much area does one meter cover?

A standard meter takes four sensors and covers about 4,000 sq ft of floor area.

How do we see the data?

Readings sync to the cloud over site Wi-Fi, or LoRa on V3.0. Your team sees live strength, temperature and TTF curves on the mobile app and web app, and can print reports.

Do you have a system for precast plants?

Yes. Precast VC-1.0 uses a permanent sensor embedded in the casting bed and an ambient sensor that starts and stops logging on every pour automatically, with continuous data and auto reset.

Can you monitor mass concrete temperatures?

Yes. Our temperature monitoring service measures core, mid-depth, surface and ambient temperatures on mass pours, tracks peak temperature and core-to-surface ΔT, and hands over an auditable record. See the temperature monitoring service.

Is CP-CMMS made in India?

Yes. It is designed and manufactured in Pune and protected by three granted Indian patents.

Ready to build with intelligence?

Get a personalised demo on your own mix and site conditions. We calibrate with your team, deploy on your pour and train your engineers.

Download brochure (PDF)

* Required

We use these details only to respond to your request.