
Maturity meter
Logs temperature from every sensor from the moment of placement.
Sensors cast into the element, a rugged meter at the pour, and live strength on your phone and laptop from fresh to hardened state.
Download product brochure
Logs temperature from every sensor from the moment of placement.

Reusable 200+ times, with sacrificial sensors where retrieval isn't possible. Robust, waterproof, digital output.

Live strength, temperature and TTF curves per sensor, project set-up, sensor comparison and printable reports.

First CP-CMMS maturity meter deployed on site.

Rugged black enclosure, four reusable digital sensors, site Wi-Fi.

VC-1.0 for precast plants: a permanent sensor in the casting bed and automatic start and stop on every pour. VM1.0 for match-curing and mix design.

Compact and more reliable. LoRa wireless, long battery life, DIY installation, easier to use.


Cubes tested at different ages build your mix's strength-maturity curve, using a fixed sensor in two cubes per mix. Usually one to two days.
Sensors go into the element at critical points, and the meter logs from the moment concrete is placed.
Temperature-time factor converts to in-place strength through the calibration curve, per ASTM C1074.
Strip, stress, lift or load when the target is reached, with a report to prove it.



A customised system for precast factories. The sensor is embedded permanently in the casting bed, so routine pours need no cast-in sensor and every pour on that bed is recorded.





| Specification | Standard | Precast VC-1.0 | V3.0 |
|---|---|---|---|
| Photo | ![]() | ![]() | ![]() |
| Best for | Building and infrastructure sites | Precast plants, every shift | Large sites and DIY installs |
| Sensors per meter | 4 | Up to 9 active, including ambient | On request |
| Sensor format | Reusable and sacrificial, 3 m cable | Permanent sensors in the casting bed, flush with the mould base plate | Reusable and sacrificial |
| Cable reach | 3 m and 10 m extensions | Up to 20 m cumulative | 3 m and 10 m extensions |
| Connectivity | Site Wi-Fi | Site Wi-Fi | LoRa |
| Power | Rechargeable, optional weatherproof supply | Continuous charging, auto reset | Long-life battery |
| Coverage | About 4,000 sq ft of floor per meter | Two sensor points per element | On request |
All models: maturity method per ASTM C1074, sensors reusable 200+ times, readings on app, web app and site software, training and technical support included.
Standard practice for estimating concrete strength by the maturity method. The basis for every strength value CP-CMMS reports.
Estimating concrete strength in transportation construction by maturity tests.
ACI report on in-place methods to estimate concrete strength, including the maturity method.
Guides to hot- and cold-weather concreting, where temperature records matter most.
India's code of practice for plain and reinforced concrete.
Indian Roads Congress code of practice for concrete road bridges.
The same sensors and software turn a cement and concrete lab into a continuous data source. Hydration, mix behaviour and strength are recorded automatically and non-destructively.
Thermal measurement of early hydration per ASTM C1753.
Lab standards: ASTM C1753 early hydration by thermal measurement · ASTM C918 early-age strength and later-age projection · ASTM C1064 temperature of fresh concrete · ASTM C1074 maturity method.
Download the smart lab sheetProduct brochure and one-page use-case sheets, ready to share with your team.
A concrete maturity meter records the temperature history of concrete from the moment it is placed. Using the maturity method in ASTM C1074, that history becomes a temperature–time factor, and a calibration curve for your mix turns it into in-place compressive strength, live.
It cuts them by at least 50%. Cubes are still used to calibrate each mix and wherever your contract requires them for acceptance. Day-to-day decisions such as de-shuttering, stressing and lifting run on measured in-place strength instead of waiting for cube results.
Usually one to two days. Cubes of your mix are tested at different ages, with a fixed sensor in two cubes per mix, to build the strength–maturity curve used on site.
Yes. CP-CMMS sensors are reusable 200+ times. Sacrificial sensors are available where retrieval isn't possible.
A standard meter takes four sensors and covers about 4,000 sq ft of floor area.
Readings sync to the cloud over site Wi-Fi, or LoRa on V3.0. Your team sees live strength, temperature and TTF curves on the mobile app and web app, and can print reports.
Yes. Precast VC-1.0 uses a permanent sensor embedded in the casting bed and an ambient sensor that starts and stops logging on every pour automatically, with continuous data and auto reset.
Yes. Our temperature monitoring service measures core, mid-depth, surface and ambient temperatures on mass pours, tracks peak temperature and core-to-surface ΔT, and hands over an auditable record. See the temperature monitoring service.
Yes. It is designed and manufactured in Pune and protected by three granted Indian patents.
Get a personalised demo on your own mix and site conditions. We calibrate with your team, deploy on your pour and train your engineers.
Download brochure (PDF)